Commit Graph

3 Commits

Author SHA1 Message Date
Bernardo Magri
c962d07841 fix(power): #60 name-agnostic system-battery scan
All checks were successful
Check / eval (push) Successful in 2m53s
Replace BAT* globs with type=Battery + !scope=Device (same filter as
nomarchy-battery-notify) in charge-limit oneshot, menu gates, Waybar
power-profile self-gate, doctor, and install chassis detection. CMB0-
style names get charge-cap and laptop modules consistently.

V3 pending: confirm on non-BAT* hardware (HARDWARE-QUEUE). Close #60.

Verified: V1 (option-docs, hardware-db-modules, battery-charge-limit VM).
2026-07-10 08:32:24 +01:00
Bernardo Magri
9976ea06f5 feat(power): re-apply battery charge limit on AC state change
The threshold was written boot-only, so a firmware that clears
charge_control_end_threshold on unplug would silently lose the cap
until the next reboot. Add a services.udev rule on the mains adapter
(ATTR{type}=="Mains", vendor-neutral) that restarts the oneshot via
systemctl --no-block on every AC state change. Uses restart (not
try-restart) so it re-applies even if the boot run was inactive.

Eval-verified: rule present when the charge limit is on, absent when
off; downstream-template-system still evaluates.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-30 21:10:44 +01:00
00f5311499 feat(power): laptop power management (power-profiles-daemon + TLP)
Adds a `nomarchy.system.power.*` surface (modules/nixos/power.nix),
replacing the bare `services.upower` (Waybar reporting only) baseline:

- power-profiles-daemon ships by default; switched through polkit (no
  root prompt). TLP is the opt-in `backend = "tlp"` for deeper battery
  tuning — the two are mutually exclusive (asserted).
- thermald behind `power.thermal.enable` (Intel-only).
- `power.batteryChargeLimit` (e.g. 80): a backend-independent sysfs
  oneshot writes charge_control_end_threshold; gated on `power.laptop`.

Switcher + indicator live home-side and self-gate on a battery being
present + powerprofilesctl running, so they hide on desktops and under
TLP — no system->home wiring (like the Waybar battery widget):

- rofi.nix: `nomarchy-menu power-profile` module + a picker entry shown
  only on laptops with PPD.
- waybar.nix: first `custom/*` module — click cycles the profile.

Installer writes `power.laptop = true` (battery probe) and
`power.thermal.enable` (GenuineIntel) into the generated system.nix, and
scaffolds the charge limit commented-out.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-14 17:35:42 +01:00