#136 CLOSED: he confirms the incident was clamshell (laptop closed), so the
gate already matched the evidence and only the words overclaimed. Swept:
idle.nix's comment + its journal line (`dpms-off skipped: docked` →
`clamshell (internal $m present but off)`), the ROADMAP entry, and #127's
own text. Docked-with-lid-open still blanks and is now explicitly untested
rather than implicitly covered.
#127 gains the exact protocol he asked for — two tests, separated by risk:
A) the mitigation holds (safe, unattended, journal line to grep); B) the
decisive one, whether DPMS-off was ever the trigger, run by hand because the
shipped mitigation would otherwise skip it. B self-recovers after 45s
(dpms on + hyprctl reload — #142's hammer re-lights eDP) because this box
has no sshd. All three outcomes are written down with what each implies,
including "input wakes it" → revert the mitigation and #135 never exists.
#130 decided: fix the contrast, we hold ourselves higher than GNOME —
matching upstream is no defence at 2.7:1, under even the large-text floor.
Recorded with the two candidate shapes and a preference for darkening our
label over the user's accent, plus the note that check-theme-contrast.py
covers palette pairings only, so it needs its own assertion or it rots
exactly like #98.
#143 decided: wait for rofi#2317, do not carry a patch — a patched rofi
means every machine compiles rofi from source, on every lock bump, to fix a
highlight. Now a watch, not work.
#120 deferred to PROPOSED intact: the measurements stand, and the no-binary-
cache gotcha probably makes cachix the real first step anyway.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Blanking the only live output in dock mode led to a brick where wake and
even VT switch failed. Skip hypridle's 10m dpms off when any laptop
internal (eDP/LVDS/DSI) is present but not enabled; lock at 5m remains.
Undocked still blanks. Document LATER revisit for intentional
DPMS-when-docked once wake is proven.
V1: nix flake check --no-build. V3: docked idle stays lit under lock.
Recover from DPMS/lock blackout without a second machine: undock/enable
always issue dpms on; hypridle on-resume and after_sleep run
nomarchy-display-wake (zero-output undock rescue + auto-dump).
nomarchy-display-dump writes ~/nomarchy-display-dump-*.txt (SUPER+SHIFT+D
or Ctrl+Alt+F3 TTY). HARDWARE-QUEUE #127 no longer requires SSH.
V1: nix flake check --no-build. V3: docked idle on AMD box still open.
Human decision: 1h delay, battery only, Preferences enable/disable.
Wire systemd suspend-then-hibernate + HibernateDelaySec=1h +
HibernateOnACPower=false when settings.power.suspendThenHibernate is on
and boot.resumeDevice is set. Lid: s2h undocked, plain suspend on AC.
nomarchy-suspend for hypridle + Power menu (live state). LUKS unlock
before encrypted hibernate so s2h→disk is not double-password.
state-bridges assert the policy; HARDWARE-QUEUE #115 + suggested order.
V1: nix flake check --no-build. V3: bag-carry on hardware.
The machine flake's git-tracked settings file is system state, not
"theme" only — rename it to state.json. CLI becomes nomarchy-state-sync
with a nomarchy-theme-sync symlink for scripts and muscle memory.
Eval (mkFlake, doctor, lifecycle) still accepts theme-state.json; the
next write migrates to state.json and removes the legacy file.
Documented in MIGRATION.md; drop the CLI alias after release notes.
Two nits from the post-reboot hardware pass.
Super+Escape never locked anything — there was no lock bind at all, only
the power menu's Lock row and the idle timeout. (Escape is unusable here
anyway; keybinds.nix has said so since the power menu moved to Super+X,
and an unswallowed Escape just prints its sequence into the terminal.)
Lock now lives at Super+Ctrl+L: the one row in that family that is not a
menu module, because bare Super+L collides with common app binds. It
dispatches loginctl lock-session, the same path the power menu's Lock row
takes, so logind marks the session locked and hypridle's lock_cmd remains
the single place that decides what a lock looks like.
The lock prompt read as clipped fragments ("password… or scan finger" /
"scanning finger…") next to a 64px clock. Both messages are sentences
now, and the input field's placeholder is sentence-cased to match — the
two can share the screen, so they cannot read as two different voices.
V1 + V3 pending: nix flake check --no-build passes; the built home
generation carries `bind=$mod CTRL, L, exec, loginctl lock-session`, the
new ready/present messages (built with idle.fingerprint forced on, since
the in-repo config leaves it off), and a "SUPER + CTRL + L Lock screen"
row the cheatsheet generated on its own from the shared list. The reader
itself only exists on hardware.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
e2de906 fixed the invisible reader and left an invisible message. The lock
screen is deliberately just the clock: the input field fades out while empty
(hyprlock's fade_on_empty default) and only appears once you type. So
$FPRINTPROMPT in the field's placeholder rendered faithfully into a widget
nobody sees until they have already given up on the finger and started typing
— which Bernardo reported as "unlock worked, but still no message", the same
symptom as before the fix, for a completely different reason.
I had assumed the field was visible and reasoned from there. It has never been
visible; "it has always been like this" is what cracked it.
Both candidate surfaces were tested on hardware rather than picked: a label
does expand $FPRINTPROMPT (so the line is live — "password… or scan finger",
then "scanning finger…" on touch), and fade_on_empty=false would also work.
Bernardo chose the label: it keeps the clock-only look, where the always-on
field would have made opting into fingerprint mean permanently gaining a
widget the design never had.
subtext-on-base is the palette's secondary-text role and is already held to a
3.0 floor on all 21 themes by checks.theme-contrast — the guard that exists
because two themes once shipped subtext == base and made hint text invisible,
which is the same bug as this commit, one layer down. The placeholder goes
back to its exact previous string, so the non-fingerprint path is unchanged.
Verified V2: nix flake check --no-build; checks.theme-contrast and
checks.option-docs pass. V3: Bernardo confirms the line reads on the real
lock screen — the mechanism itself is already proven on his reader.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Bernardo tested the lock screen after turning `fingerprint.pam` on: sudo took
a finger, hyprlock did nothing. The PAM stack was not the problem — grosshack
sits in /etc/pam.d/hyprlock at order 11400 exactly like sudo's. hyprlock just
never asks it: its PAM conversation runs only on submit, so a module that
wants to prompt *while* polling the reader never gets a turn. hyprlock has its
own fprintd-over-D-Bus backend instead, behind `auth:fingerprint:enabled`,
which nothing in the distro ever set. So `fingerprint.pam = true` promised
"login + sudo" and silently skipped the surface you meet most often.
The second half is the one worth having: enabling the backend alone yields a
reader that works while the field still reads "password…". $FPRINTPROMPT is
the ONLY slot hyprlock renders the ready/scanning/failed messages into, and
ours hardcoded the placeholder — proven on hardware, where a test config with
the backend on unlocked by finger and said nothing whatsoever. A feature that
works and cannot be discovered fails VISION's "discoverable without reading
the README" either way, so the placeholder now carries $FPRINTPROMPT and the
messages mirror sudo's "Enter Password or Place finger".
New `nomarchy.idle.fingerprint` (default false), mirroring
`nomarchy.hardware.fingerprint.pam` the way `nomarchy.keyboard.layout` mirrors
`services.xserver.xkb.layout`: hyprlock is configured in standalone Home
Manager, which has no `osConfig` to derive the NixOS side from. Opt-in rather
than implied, because with no reader hyprlock advertises a scan that cannot
happen. Documented in the template (SoT for opt-in comments) and README —
option-docs caught the missing row, which is the check doing its job.
Verified V2: nix flake check --no-build; checks.option-docs passes (failed
first with "undocumented option", as it should). V3 pending: Bernardo applies
it and confirms the field reads "password… or scan finger" and both factors
work — the mechanism itself is already proven on his reader via a test config.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Explicit HandleLidSwitchDocked=ignore under services.logind so closing
the lid with an external display connected does not suspend. Undocked
lid path left to upstream defaults. checks.clamshell-logind asserts the
baked logind.conf and active logind; real multi-monitor lid V3 queued.
Verified: V2 — flake check --no-build; checks.clamshell-logind green.
V3 pending: HARDWARE-QUEUE #86 lid+external on a laptop.
The previous nomarchy-hibernate-unlock ran `pkill hyprlock` after a
hibernate resume, but killing a Wayland session-lock client without
releasing the lock trips hyprlock's "go to a tty" crash failsafe -- the
compositor keeps the screen locked for safety. So resume showed a hyprlock
error screen instead of unlocking.
Fix it the right way: never engage the lock before an encrypted hibernate
(the LUKS passphrase at resume is the gate). Replace the post-resume unlock
with a nomarchy-lock-before-sleep unit that takes over hypridle's
before_sleep_cmd: it locks on the RAM-resume sleeps (suspend / hybrid-sleep
/ suspend-then-hibernate) always, and on hibernate.target only when the disk
is unencrypted. idle.nix drops before_sleep_cmd accordingly.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
hypridle's suspend listener now runs `nomarchy-on-ac || systemctl
suspend`, so a plugged-in machine no longer suspends itself mid-idle
(long builds, media, presentations survive). It also fires sooner —
15 min, vs the old fixed 30 — since it now only applies unplugged.
Lock and screen-off are unchanged on both power sources, and logind's
lid handling stays at its sensible defaults (suspend on lid close,
ignore when docked).
Closes the idle-cohesion follow-up under the laptop-power roadmap item.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
hypridle locks hyprlock before every sleep -- right for suspend, but
redundant for hibernate: the LUKS passphrase entered at boot already gates
the resume, so the user typed a password twice. Add a nomarchy-hibernate-
unlock systemd unit (WantedBy hibernate.target, After systemd-hibernate.service
=> runs post-resume) that dismisses hyprlock, gated on the disk being LUKS-
encrypted. Suspend (and the RAM-resume phase of suspend-then-hibernate) keep
locking -- they have no passphrase gate; an unencrypted hibernate keeps its
lock too. idle.nix gains a pointer comment; roadmap item marked done.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Plymouth boot splash ported from the legacy branch (modules/nixos/
plymouth/): logo + eased progress + LUKS entry, background tinted from
theme-state.json via the new nomarchy.system.stateFile (wired by
mkFlake/lib.nix; null → Tokyo Night fallback). Default on; OFF on the
live ISO (boot-message visibility on the install medium). Pulls
boot.initrd.systemd, which also drives the keyboard-at-LUKS feature.
- system.nixos.distroName = "Nomarchy" (os-release PRETTY_NAME,
systemd-boot entries, ISO menu label). distroId left "nixos" (feeds
DEFAULT_HOSTNAME + upstream isNixos checks — roadmapped).
- nixpkgs.config.allowUnfree distro-wide (here + both import-nixpkgs
sites) — unblocks claude-code for the menu's ask-Claude module.
- systemd-boot.configurationLimit = 10 so entries don't fill the ESP.
- Live ISO: nomarchy.idle.enable = false — hypridle was suspending the
VM mid-install (the install-hung regression); installed systems keep it.
- flake.nix offline pins (verified 0-leak via a foreign-identity
gap-analysis probe): the repo's own standalone HM gen + inputDerivations,
mustache-go + stdenv (stylix re-renders base16 per switch), microcode-amd/
intel (enableRedistributableFirmware activated updateMicrocode →
source-build cascade), buildEnv's builder.pl, findXMLCatalogs, and the
representativeInstall mirror (xkb/initrd-systemd/microcode).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
