Bernardo rightly pushed back on deferring #79 to a real session: a
simulated sunset IS VM-testable. Add checks.auto-theme, a runNixOSTest
that installs nomarchy-theme-sync, points NOMARCHY_DEFAULT_THEMES at the
presets, stubs the rebuild via NOMARCHY_REBUILD (a marker), configures
the day/night pair + schedule, then WALKS THE VM CLOCK across the
boundary: 19:55 -> 20:05 -> 20:06 -> next-day 07:30, asserting the active
theme goes summer-day -> night (1 rebuild) -> night (idempotent, still 1)
-> day (2 rebuilds).
This isolates the auto decision + apply + rebuild-trigger; the actual
home-manager switch is stubbed (that generic apply path is exercised by
every manual theme change). The only on-hardware residual is the user
timer firing on its OnCalendar schedule, which systemd-analyze validates.
#79 drops its [blocked:hw] tag — it's V2-verified. ROADMAP updated;
lesson recorded in MEMORY (don't default timer/session features to V3:
stub the generic step, simulate the clock).
Verification: V2 PASS (nix build .#checks.x86_64-linux.auto-theme, fresh,
exit 0); V0 flake check green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
nomarchy-doctor gains a read-only hibernate/sleep section (the highest-ROI
Day-2 gap, a natural #76 follow-on): resume device on the kernel cmdline
(+ resume_offset for a swapfile), disk swap >= RAM, zram active, and any
suspend/hibernate error in the previous boot's kernel log. Self-gates
(skip on swap=0) and emits only ok/warn/skip, so it never fails the sheet.
Adds `hibernate` to the checks.doctor probe list so the row is asserted.
Fixes a set -euo pipefail hazard the first VM run caught (exit 1, no
verdict): a no-match grep inside $(...) and a `cond && action` both abort
under set -e — now guarded with || true / || echo 0 / if. Recorded in
MEMORY as a reusable gotcha for writeShellScriptBin scripts.
Verification: V2 PASS — checks.doctor VM test green (fresh build, exit 0;
asserts the hibernate row renders, healthy run stays 0). V1 — ran on real
LUKS+@swap hardware: all three ok rows render (resume set, swap 34G >= RAM,
zram 16G) and the sheet reaches its verdict. V0 bash -n + flake check.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add checks.hibernate: a runNixOSTest modeled on nixpkgs' hibernate.nix,
wired to the actual risk #76 introduces — coexistence with the zram swap
that oom.nix now enables by default. It imports oom.nix, puts the disk
swap at a lower priority than zram with an explicit boot.resumeDevice,
and uses systemd-initrd. The test drives a full
hibernate -> power-off -> resume -> crash cycle: a volatile ramfs marker
survives resume but NOT a crash-boot (proving genuine resume), and it
asserts zram sits at priority 100 while the disk swap is lower, so the
hibernate image lands on disk rather than volatile zram.
What QEMU genuinely can't do — feed a boot-time resume_offset for a btrfs
swapfile (offset only exists after first-boot allocation) or drive a
LUKS-initrd unlock — stays a V3 laptop check (HARDWARE-QUEUE, dev box
already runs that exact layout), plus the no-swap notify in a real
session. With this, all V0/V1/V2 work on #76 is done; #76 collapses to a
[blocked:hw] stub and the design record moves to ROADMAP.
Verification: V2 PASS — nix build .#checks.x86_64-linux.hibernate built
the driver fresh and exited 0. nix flake check --no-build green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
First slice of BACKLOG #76 (hibernation + zram, split): zramSwap on by
default in modules/nixos/oom.nix — the memory-pressure layer before
earlyoom. zstd @ 50% RAM (nixpkgs defaults, explicit for reproducibility),
priority 100 so day-to-day paging fills zram first and any disk swapfile
stays reserved for #76's hibernate image (hibernation can't resume from
volatile zram). Follows the earlyoom mkDefault precedent — no toggle.
Adds checks.zram-swap runNixOSTest importing oom.nix, asserting the device
is an active swap, uses [zstd], and carries priority 100.
Verified: V2 checks.zram-swap PASS (/dev/zram0 in /proc/swaps, zstd,
prio 100); V1 full distro toplevel builds; V0 flake check --no-build green.
#76 remainder (disk swapfile default + resume + installer) still open.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Extract nomarchy-pull/rebuild/home to pkgs/nomarchy-lifecycle; install
via system + home. Home profile wins on PATH so home-manager switch
installs the fixed pull (skip git when no upstream) without waiting
for a system rebuild that needed a working pull first.
V0: flake check --no-build green.
Package the installer’s pure hardware-db probe as nomarchy-detect-hw:
prints suggested hardwareProfile and system.nix snippets (or --raw
protocol lines). Does not rewrite the flake. On PATH via the distro
module; docs/HARDWARE.md §8 updated. Close#58.
Verified: V1 (build + run on AMD laptop with fingerprint/NPU/IR cam).
#54: permanent checks.installer-safety; test-install-safety harness with
offline compose-fail, LUKS-signature disk warn, and HM-hint FORCE paths.
#33: enable themed rofi scrollbars (generated + all whole-swap .rasi).
#43: MOTD + first-boot tip for System › Firmware (V3 LVFS stays hw-queue).
V2: compose-fail/disk-warn/hm-hint logs green offline; theme-shot
boreal+summer-night menus OK. V0 flake/installer-safety.
Extend checks.doctor: the bare test VM lacks every probe tool, so the
healthy nomarchy-doctor run drives all six hardware checks in skip mode.
Assert the self-gated skip rows appear (NetworkManager, fingerprint,
fwupd, VA-API) and the sheet still exits 0 — proving the section runs
without erroring under set -euo pipefail. No node changes.
Verified V2: nix build .#checks.x86_64-linux.doctor passes. Closes#44.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
#50: Bluetooth menu row + handler self-gate on `command -v
blueman-manager` (no-op when bluetooth is off, like Printers); Control
Center rollback list /tmp/nomarchy-gens → mktemp; usbutils on the
nomarchy-install PATH (fingerprint lsusb probe); export
nomarchy-doctor/control-center/battery-notify as flake packages.
Verified V0 (flake check) + V1 (packages, installer, HM generation build).
Also records #46: the swap=0 + unattended-LUKS fail-closed contracts
(208b8d4) V2-verified via a headless two-variant install — fail-closed
exits before wipe with the disk blank; swap=0 installs with no @swap
subvol and boots to a themed desktop. Both items removed from NEXT.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Four new no-VM checks.* + CI py_compile expansion:
- hardware-db-modules: installer DB module names ∈ pinned
nixos-hardware.nixosModules (a lock bump can rename a module and break
profiled installs on just the matching DMI, invisible to any VM).
- installer-compose-lock: offline lock-composer contract on fixtures.
- installer-disko: pure Nix assert — swapSize "0"/"0G" → no @swap, "2G"
→ sized, withLuks wraps root (permanently guards the #46 install fix).
- windowrule-syntax: builds the generated hyprland.conf and fails on the
pre-0.53 grammar / windowrulev2 keyword (guards ed7fd93).
CI py_compile now covers all tracked *.py; docs/TESTING.md §1 synced.
Implemented by a worktree agent; diff reviewed. Verified V0 (flake check)
+ V1 (each checks.x86_64-linux.* built on main, exit 0); agent's negative
tests confirm each guard fails on a regression.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Added toggles for updates, battery limit, bluetooth, and printing to the Control Center. Wired default values to read from theme-state.json settings. Verified: V1.
A display profile can now pin workspaces to outputs:
docked = {
monitors = [ … ];
workspaces = { "1" = "DP-3"; "9" = "eDP-1"; };
};
The bare list-of-monitors shape still works (either-type; hyprland.nix
normalizes — coercedTo refuses list-of-submodule sources). Pins bake as
Hyprland `workspace` rules from the active profile and apply instantly
on `nomarchy-display-profile apply`: keyword sets the session rule,
moveworkspacetomonitor moves open workspaces over. Pins from a
previously applied profile linger in-session until reload/rebuild
(hyprctl can only add) — inert if the output is absent, noted in the
applier.
V1: flake check green (checks.display-profiles now asserts
workspaceRule) + scratch-downstream eval: baked settings carry both
rule sets, the generated applier has the keyword+dispatch pairs
(bash -n), match/list correct with mixed shapes. V3 queued in
HARDWARE-QUEUE (rides the dock test). Item 15 complete — deleted.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
nomarchy.displayProfiles: named layouts for the same outputs, each a
list of nomarchy.monitors-style entries. The active profile lives in
the in-flake state (settings.displayProfile) on the night-light
pattern: nomarchy-display-profile apply <name> fires the baked hyprctl
rules instantly and writes the state with --no-switch; the next rebuild
bakes the profile's entries over nomarchy.monitors whole-by-name.
Monitor-rule composition is extracted to pure monitor-rules.nix
(renderer + 3-layer resolve, incl. a disable-guard so a stale menu
resolution pick can't resurrect a profile-disabled panel, and junk
state degrading to base config instead of an eval error) — because a
writeText/toFile state fixture is unreadable at flake-check eval time,
the new checks.display-profiles unit-tests the pure function directly.
Menu: System › Display gains a self-gated "Profiles ›" row (●/○ active
mark, Base layout to clear); commented template example + README row.
Verified: V0 (flake check, forcing the new check's asserts); V1 — a
scratch downstream through lib.mkFlake builds: the generated tool
passes bash -n with correct rules (disable/vrr/float scale), the baked
hyprland.conf shows the exact expected overlay, the menu renders, and
list/usage smoke-test clean. Remains: V3 live switching on a dock
(HARDWARE-QUEUE). Slices b (hotplug auto-switch) + c (workspace
binding) stay in item 15.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The bar colored the battery at 25/10% but nothing notified. New
shellcheck-gated watcher (pkgs/nomarchy-battery-notify, overlay) polls
the same sysfs the bar reads — type=Battery, scope!=Device — and fires
one toast per downward crossing (normal at 25%, critical at 10%; swaync
keeps critical up until dismissed), re-armed by charging. Self-gates on
battery presence (the powerprofile pattern), so desktops get a silent
no-op. HM user unit behind nomarchy.batteryNotify.enable (default on)
with libnotify on the unit PATH; notify-send resolves from PATH so the
VM check can shim it. poweralertd rejected: its UPower thresholds
(20/5) wouldn't match the bar, and it toasts every plug/unplug.
Verified: V0 (flake check, bash -n); V1 (template-home builds, unit in
the generation); V2 GREEN (new checks.battery-notify, test_power fake
battery: self-gate, silence at 80%, one toast per crossing, critical
urgency, charging re-arms). Remains: V3 — real swaync toast on a
draining laptop (HARDWARE-QUEUE).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
'Never has to master Nix' includes the error messages. The tool grows
validate_state (appearance schema = hard errors; settings.* and
unknown keys = warnings so menu writers and newer schemas keep
working), a read-only `validate` subcommand, and validation BEFORE
every write — an invalid set/apply is refused with the on-disk file
untouched. JSON syntax errors now say line, column, and fix. theme.nix
enforces the same schema at eval time (on the post-defaults state, so
sparse/older files still evaluate) and throws a message naming each
field, its got-value, and the fix paths — the hand-edit escape hatch
no longer ends in a Nix stack trace. Doctor's JSON fix-text points at
validate.
V1: new checks.theme-sync-validate fixture corpus green (good state,
trailing comma, bad hex, bad type, unknown key, refused set with
byte-identical file); negative mkFlake eval of a broken scratch
downstream shows the friendly throw; good-path template-home builds.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The things that actually break user machines, one command (and menu ›
System › Doctor): failed system/user units, disk space (real
filesystems only — fstype allowlist makes it VM/live safe, device
dedupe collapses / and /nix), theme-state.json parses + is
git-tracked, flake dirty/behind as warnings, generation age (profile
symlink mtime — store paths are epoch-1), snapper timeline when
enabled. Read-only by contract; every ✖ prints the one fixing command;
exit 1 on any problem. Ships as pkgs/nomarchy-doctor so the VM check
runs on a minimal node.
Verified: V1 package build (shellcheck-gated) + a real-hardware smoke
that correctly flagged a genuinely failed user unit on the dev box;
V2 green — checks.doctor VM test: induced failed unit flips the sheet
to exit-1 naming the unit and its fix, reset-failed returns healthy.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Slice (a) of the docs review: 9 undocumented nomarchy.* options got
README rows or inline .leaf mentions (autoTimezone, camera IR-hide,
intel.guc, amd.pstate/vaapi, package, system.stateFile, restic.paths).
The diff is now a flake check: option names are eval-walked from the
four option-declaring modules (config halves stay lazy) and compared
to the tables by tools/check-option-docs.py — undocumented options and
stale table rows both fail. Negative-tested against the pre-fix README
(reports exactly the 9 gaps). Item 6 split into slices a–d in BACKLOG.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Palette roles aren't uniform: summer-day and flexoki-light use subtext
as text-ON-surface (== base) and surface as a dark chip (== text), so
swaync's @subtext-on-@base body text and @surface/@text buttons were
self-colored (caught on the Latitude).
- body/summary: @text on @base — the one text pairing that passes in
every palette (survey: worst WCAG ratio 5.18 across all 21 themes;
subtext/base bottomed at 1.00 twice, muted/base at 1.27).
- hover rows + widget-title buttons: alpha(@text, 0.1) tints —
contrast by construction; subtext/surface defines dropped.
- NEW checks.theme-contrast (tools/check-theme-contrast.py): asserts
the hex-on-hex text pairings across themes/*.json, cheap (no VM).
The audit also found the generated waybar/rofi CSS shares the bug
class, live on flexoki-light (no whole-swap) → BACKLOG item 27.
Verified: V0; V1 (checks.theme-contrast builds green, 21 themes;
rendered services.swaync.style has zero @subtext/@surface). Honesty:
NOT visually verified — V3 queued (notify-send on summer-day).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Re-diagnosis of the "btrfs-assistant 2.2 segfaults on launch" bug, and
the fix is not the planned nixpkgs override:
1. gdb: the crash is btrfs_util_subvolume_iterator_next() —
libbtrfsutil's UNPRIVILEGED subvolume-iteration path in btrfs-progs
6.17.1 (upstream-fixed after 6.17.1, kdave/btrfs-progs 886571653).
Symbol versions were checked and match: not ABI/link drift.
2. VM A/B on real btrfs: as root it works (exit 0); as a user it
segfaults (139). The pkexec launcher runs it as root — so the GUI
path was fine all along, except…
3. …the distro shipped NO polkit authentication agent: every pkexec
prompt in the session failed silently. That is the actual root
cause of "the GUI doesn't open".
Shipped: hyprpolkitagent (Hyprland's Qt agent — the prompt is
Stylix-themed) via exec-once in hyprland.nix; `nomarchy-menu snapshot`
prefers btrfs-assistant-launcher again, with the nomarchy-snapshots
fzf flow kept as fallback (and for SSH); checks.snapshot-gui guards
the root path + offscreen GUI event loop on a real btrfs volume so a
lock bump can't silently regress it. No btrfs-progs patch: all our
flows are root-side; the unprivileged fix arrives with a lock bump.
Verified: V0 (flake check) + V2 (snapshot-gui check, executed green) +
V1 (HM generation builds; hyprland.conf carries the agent exec-once;
generated menu passes bash -n with the launcher wiring). Remaining V3
queued: first on-hardware themed polkit prompt.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
modules/nixos/oom.nix — running out of memory now kills the offending
process (with a desktop notification via systembus-notify) instead of
freezing the desktop for minutes until the kernel OOM killer fires.
earlyoom over systemd-oomd, deliberately: oomd kills whole cgroups,
and a Hyprland session runs as ONE scope (nothing here spawns per-app
systemd scopes, unlike GNOME) — under pressure oomd would take out the
entire desktop to save it. earlyoom kills the single largest process
before the thrash point. nixpkgs default-enables oomd in an inert
state (no slices monitored); it is disabled outright so there is one
owner. Session plumbing is --avoid-listed (unanchored — NixOS wrappers
rename comm to .foo-wrapped); no --prefer tuning, largest-RSS
selection already finds the hog. All mkDefault; opt out with
services.earlyoom.enable = false (README note added).
Verified: V0 (flake check) + V2 — new checks.oom-protection
runNixOSTest, executed: a chunked allocator (686 MB peak, 1 GB VM) is
SIGTERM'd by earlyoom in 0.1 s, a bystander unit survives (the
process-level granularity the module exists for), and systemd-oomd is
asserted inactive. 25 s runtime.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Completes the remaining "Distro branding, round 2" work.
GRUB theme: hosts/live.nix builds nomarchyGrubTheme whose background is
the same composed splash as the isolinux/BIOS splash (accent logo on
base), with a palette-coloured boot menu and accent timeout bar. Derived
from nixos-grub2-theme only to reuse its bundled DejaVu .pf2; the stock
NixOS logo is dropped (ours is in the background). Wired as
isoImage.grubTheme so UEFI boot matches BIOS.
distroId: set system.nixos.distroId = "nomarchy" so os-release is honest
(ID=nomarchy, ID_LIKE=nixos). Safe — switch-to-configuration builds its
"is this NixOS?" guard from the configured distroId (and /etc/NIXOS is
the fallback), so rebuilds keep working. isNixos→false blanks the
nixos.org URLs, so extraOSReleaseArgs restores them to the project.
Adds checks.distro-id (runNixOSTest): boots distroId=nomarchy and runs
switch-to-configuration dry-activate green; os-release eval-verified from
the real downstream config; grub theme built + structure-verified.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add checks.battery-charge-limit (runNixOSTest): the test_power module
fakes a Mains adapter, toggling ac_online emits a real power_supply
uevent, and the test asserts the udev rule restarts the oneshot (changed
InvocationID). Verifies the re-apply *trigger* at runtime, beyond the
earlier eval check; the sysfs write still needs real hardware. Also
records the SSH_AUTH_SOCK rendered-artifact verification in the roadmap.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Harden the hardware-enablement broad seed for newer hardware:
- xe vs i915: intel.guc emits the i915 param (i915.enable_guc=3), which the
newer `xe` driver (Lunar Lake / Battlemage / Panther Lake, recent Xe GPUs)
ignores — it enables GuC by default. hardware-db.sh now reads the in-use
GPU driver (lspci -k) and writes `intel.guc = false` on xe hardware, so the
toggle isn't a misleading no-op there.
- NPU detection by PCI accelerator class [1200] (+ keywords), attributing the
vendor, instead of a fixed device-ID list — so new NPUs (e.g. Panther Lake)
are caught without a code change. Known IDs kept as a fallback/reference.
- Kernel awareness: a nomarchy.hardware.latestKernel escape hatch
(linuxPackages_latest) for very-new hardware whose drivers only just landed,
and a build-time warning when npu.enable predates the shipped kernel
(amdxdna needs 6.14+, intel_vpu wants recent). Downstream default is 6.18,
which already carries amd-pstate + amdxdna; the reference host pins latest.
- VM test (checks.hardware-toggles, pkgs.testers.runNixOSTest): boots a
minimal VM with the toggles on and asserts the config landed — amd_pstate
+ i915.enable_guc in /proc/cmdline, fprintd.service present, pam_fprintd in
/etc/pam.d/sudo. Passing. (Hardware behaviour still needs bare metal.)
Docs: README + template note latestKernel; ROADMAP records the hardening.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Document the main=dev / v1=release-pointer model in flake.nix (where the
v1 ref is defined) and mark the repo-sanitize roadmap items shipped
(installer prune, option-table reconcile, settings untrack, branch
realignment).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
console.useXkbConfig and boot.initrd.systemd.enable are set distro-wide
(lib.mkDefault true in modules/nixos/default.nix, since the LUKS-keymap
fix), so the installer rewriting them in the generated system.nix was
redundant. Drop them there and from the offline-pin test fixture in
flake.nix — the nomarchy module still defaults them on, so the closure
(and the pin set) is unchanged; verified the values still resolve true
and `nix flake check` passes. Only the machine-specific xkb layout is
written now. Adjusts the README keyboard-option wording to match.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Plymouth boot splash ported from the legacy branch (modules/nixos/
plymouth/): logo + eased progress + LUKS entry, background tinted from
theme-state.json via the new nomarchy.system.stateFile (wired by
mkFlake/lib.nix; null → Tokyo Night fallback). Default on; OFF on the
live ISO (boot-message visibility on the install medium). Pulls
boot.initrd.systemd, which also drives the keyboard-at-LUKS feature.
- system.nixos.distroName = "Nomarchy" (os-release PRETTY_NAME,
systemd-boot entries, ISO menu label). distroId left "nixos" (feeds
DEFAULT_HOSTNAME + upstream isNixos checks — roadmapped).
- nixpkgs.config.allowUnfree distro-wide (here + both import-nixpkgs
sites) — unblocks claude-code for the menu's ask-Claude module.
- systemd-boot.configurationLimit = 10 so entries don't fill the ESP.
- Live ISO: nomarchy.idle.enable = false — hypridle was suspending the
VM mid-install (the install-hung regression); installed systems keep it.
- flake.nix offline pins (verified 0-leak via a foreign-identity
gap-analysis probe): the repo's own standalone HM gen + inputDerivations,
mustache-go + stdenv (stylix re-renders base16 per switch), microcode-amd/
intel (enableRedistributableFirmware activated updateMicrocode →
source-build cascade), buildEnv's builder.pl, findXMLCatalogs, and the
representativeInstall mirror (xkb/initrd-systemd/microcode).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
nixpkgs.config.allowUnfree in the system module (covers the live ISO
via useGlobalPkgs and every mkFlake machine) plus the two explicit
`import nixpkgs` sites (repo + lib.nix) so the standalone HM desktop
sees the same package set. Unblocks claude-code for the menu system's
ask-Claude module, vendor drivers, etc. Opt out with
`nixpkgs.config = lib.mkForce { allowUnfree = false; }`.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Roadmap items 1+2 plus the issues found testing on a Latitude 5410:
- Ship the 10 most popular Nerd Fonts by default (iosevka swapped for
mononoki: 1.1 GB vs 27 MB) and warn from nomarchy-theme-sync when a
configured fonts.mono/fonts.ui family isn't installed (fc-match) —
fontconfig substitutes silently otherwise.
- hardware.enableRedistributableFirmware: installed systems shipped NO
firmware blobs (wifi/SOF audio/BT) — nixos-generate-config only emits
microcode lines referencing this flag, it never sets it.
- Live ISO wifi: networking.wireless.enable = mkForce false killed
NetworkManager's supplicant — since 26.05 the NM module drives its
wifi backend THROUGH networking.wireless (dbusControlled). Devices
vanished from nmtui with iwlwifi loaded and no rfkill block.
- Hyprland 0.55: launch sessions via start-hyprland (watchdog; bare
binary warns), add the new gesture keyword (workspace_swipe is gone —
touchpads had no gestures at all), media keys via wpctl/bindel/bindl
plus the missing mic/play/next/prev binds.
- Offline theme switching: pin mustache-go + stdenv + the repo's own
standalone HM generation (incl. home-files inputDerivation) into the
ISO — stylix re-renders base16 templates per switch and an offline
`apply` cascaded into building stdenv from source (1107 drvs).
Verified with tools/vm/gap-analysis.py: 17 config drvs, zero fetches.
- Stylix: track release-26.05 (kills the HM version-skew warning and
the stale home-manager follows), lock updated.
- Roadmap: swaync (no notification daemon ships today).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Installed machines and the downstream template now resolve nomarchy from
git+https://git.bemagri.xyz/bernardo/nomarchy.git?ref=v1 (the lock's
original node carries the ref too), so `nix flake update` follows the
release branch instead of the forge's default branch. README quickstart
points at the real forge.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Round 7 in-VM: autodetection emitted common-cpu-intel, whose nixos-hardware
module pulls the whole Intel graphics stack (intel-media-driver,
compute-runtime, libva, level-zero…) — none of it on the ISO, so the
offline install built graphics drivers from source. The representative
pin now imports the common-* profiles (intel+amd cpu/gpu, laptop, ssd,
pc), covering what the detector emits on ordinary machines.
Model-specific profiles may still need network.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Walking the install-shaped toplevel's drv graph against the ISO's actual
path set (tools/gap analysis) found why offline installs kept building
from source:
- system-path is rebuilt on EVERY machine: buildEnv's package-list order
follows module-graph order, which any hardware profile reshuffles →
pin its builders (texinfo, getconf)
- greetd.toml embeds the auto-login user and is generated by remarshal;
building remarshal offline drags its test closure (matplotlib → ffmpeg
→ x265…, ~1900 drvs) → pin pkgs.remarshal
- second-level tools for the always-rebuilt drvs: kmod.dev +
nukeReferences (modules-shrunk), xorg.lndir (unit dirs), libxslt.bin
(dbus config), python3Minimal (etc)
- the representative pin now has a vfat /boot like a real install
(mtools/dosfstools enter systemPackages via the vfat fs-type gate)
Verified on the host: the remaining offline build set for a foreign
username/hostname/UUID config is 66 trivial config drvs + eval-time file
copies from the pinned nixpkgs tree — zero network. Same check for the
per-username HM activation: 15 drvs, offline-clean.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The full system build closure adds ~134 GB to the store and would have
produced an unusable multi-ten-GB ISO. Back to targeted inputDerivation
pins; the still-missing second-level build tools get pinned explicitly
next, from a clean committed-tree gap analysis.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Round 6 still hit a from-source cascade: every per-machine drv (units,
initrd pieces, dbus config, modules-shrunk) needs its own build tools
(lndir, builder.pl, kmod-dev, nuke-refs, libxslt-bin, …), one level
deeper than targeted inputDerivation pins reach. Use the documented
mechanism instead: system.includeBuildDependencies = true on the
representative install pin. Bigger ISO, networkless installs.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Offline nixos-install still built from source: the drvs that embed the
user's hostname/username/UUIDs (etc, initrd, toplevel, HM activation)
must be REBUILT, and their builders need tools outside every runtime
closure (etc → python3-minimal, initrd → packing tools). Pin each drv's
inputDerivation into the ISO — the standard nixos-test offline trick.
Also: with no network every substituter query is a DNS retry storm that
ends in a nix goal.cc assertion crash (core dump observed); the installer
now probes connectivity and disables substituters when offline, both on
the live system and inside the nixos-enter HM pre-activation.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The offline nixos-install failed building from source: the generated
config enables snapper/auto-login/LUKS-initrd/swapfile-resume on a BTRFS
root, none of which the bare template (ext4 placeholder!) pulls in — so
snapper, nixos-rebuild-snap, btrfs-progs-lib and cryptsetup-bin were
absent from the ISO. The pinned system now mirrors the installer's output
(closure-diff verified).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
disko builds its format/mount script at install time; offline, the
script's tool closure (file, which, wrapper hooks) wasn't on the ISO and
nix tried to build it from source — which needs the network. Pre-building
one representative script (luks + swap variant) pins every input; the
user's actual invocation then differs only in the final text-generation
derivation, which builds offline in seconds.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Found by running the unattended install in an offline QEMU VM:
- compgen is missing from nixpkgs' non-interactive bash (the package
shebang) — replaced with plain glob tests in hardware-db and prewipe
- disko's eval resolves <nixpkgs> via NIX_PATH (a dead channel on the
ISO) and tried channels.nixos.org — export NIX_PATH to the pinned
nixpkgs source and point the flake registry at an empty baked file
- lock nomarchy by path (the source the ISO carries) instead of
git+https: git inputs clone even when narHash is known, which kills
offline installs; `original` keeps the forge URL so a later
`nix flake update` re-resolves normally. Works from dirty-tree ISOs too.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Ported from the previous iteration's installer (3bdfc35), adapted to the
mkFlake world. gum TUI: disk pick, optional LUKS2, user/hostname/timezone,
DMI → nixos-hardware autodetection (hardware-db.sh). disko partitions
GPT + 1 GiB ESP + BTRFS subvolumes; the generated machine flake lands at
~user/.nomarchy (one mkFlake call, /etc/nixos symlinks to it) and
nixos-install makes it bootable (UEFI/systemd-boot, v1 single disk).
Offline by construction: the target flake.lock is composed from the rev
the ISO was built from (compose-lock.py), `nix flake archive` seeds the
target store, and the ISO pre-builds the template system + desktop.
First boot lands themed: the HM generation is pre-activated in chroot.
mkFlake grows two things for this: hardwareProfile now also takes a list
(autodetection emits several common-* modules), and installed systems get
the standalone home-manager CLI from the pinned input. Unattended mode
(NOMARCHY_UNATTENDED=1 + env) documented in docs/TESTING.md §4.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Downstream users now own only system.nix and home.nix; their flake.nix is
generated once from the template and never hand-edited. mkFlake (lib.nix)
wires both layers and maps hardwareProfile = "<name>" to nixos-hardware
modules (new input, pinned here, nixpkgs follows ours; unknown names fail
with did-you-mean suggestions). Flake checks evaluate the template through
mkFlake — including a real profile — so drift fails `nix flake check`.
Also from the live-VM testing session: install the home-manager CLI in the
live ISO and pin flake inputs transitively (offline theme switching needs
stylix's own inputs too), plus swww→awww doc updates.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Full replacement of the previous iteration, rebuilt around three ideas:
- Pure evaluation: theme-state.json lives inside the flake and is read
via the nomarchy.stateFile option — no --impure, ever.
- All-Home-Manager theming: `nomarchy-theme-sync apply` writes the JSON
and runs `home-manager switch`; every theme change is one atomic,
rollbackable generation. Wallpaper (swww) is the sole runtime piece.
- Flat, downstream-first layout: modules/{nixos,home} with one
options.nix each, exported as nixosModules/homeModules + overlay +
flake template; system (nixos-rebuild) and desktop (home-manager
switch) rebuild paths are fully split.
Ships 21 themes imported from the previous iteration (palettes,
wallpapers, btop themes, six whole-swap Waybar identities), Stylix for
the GTK/Qt/cursor long tail, a live ISO target with offline theme
switching, and docs/TESTING.md with the QEMU verification workflow.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
