diff --git a/agent/BACKLOG.md b/agent/BACKLOG.md
index cef15f2..c611493 100644
--- a/agent/BACKLOG.md
+++ b/agent/BACKLOG.md
@@ -72,7 +72,9 @@ interplay handled in `modules/nixos/default.nix` / `modules/home/idle.nix`.
 
 **Remaining slices:**
 
-1. **Docs** — `docs/MIGRATION.md` hibernation-enable runbook (V0).
+1. ~~**Docs** — `docs/MIGRATION.md` hibernation-enable runbook (V0).~~ ✓
+   shipped 2026-07-10 (§ "Enabling hibernation on an existing machine";
+   commands verified live against the dev machine's LUKS+@swap layout).
 2. **Menu** — Hibernate row: notify-on-failure when no swap configured
    (behavioral, V1/V2). Keep the row unconditional.
 3. **Verify (required)**
diff --git a/agent/JOURNAL.md b/agent/JOURNAL.md
index 7ed2bcd..42f91fd 100644
--- a/agent/JOURNAL.md
+++ b/agent/JOURNAL.md
@@ -17,6 +17,24 @@ Template:
 
 ---
 
+## 2026-07-10 — #76 slice 1: MIGRATION.md hibernation runbook
+- **Task:** BACKLOG #76 remaining slice 1 — docs runbook for enabling
+  hibernation on an existing machine (per the settled "docs not tool" call).
+- **Did:** Added § "Enabling hibernation on an existing machine (no reinstall)"
+  to `docs/MIGRATION.md`: create `@swap` subvol (subvolid=5) + `mkswapfile`
+  (NOCOW), read `map-swapfile -r` offset, wire `fileSystems."/swap"` +
+  `swapDevices` + `resumeDevice` + `resume_offset` into system.nix. Flagged
+  the mount as required on the hand-edit path (installer gets it from
+  disko-gen hardware-config). Notes zram-priority reservation, no-LUKS
+  variant, `swap=0` opt-out. Worked example = this dev machine.
+- **Verified:** **V0** — read-only commands run live against this machine's
+  real LUKS(`cryptroot`)+btrfs(`@`)+`/swap/swapfile` layout (RAM 31G, fsuuid,
+  `findmnt SOURCE`, `mkswapfile` flags, zram@100 vs swapfile@-1 confirms the
+  design intent). `nix flake check --no-build` green.
+- **Pending:** slice 2 — Hibernate row notify-on-failure (V1/V2); then the
+  V2 hibernate VM test + V3 laptop.
+- **Next suggestion:** slice 2 (menu notify-on-failure).
+
 ## 2026-07-10 — #76 hibernation design calls (no commit yet → this bookkeeping)
 - **Task:** BACKLOG #76 design slice — Bernardo made the open calls.
 - **Did:** Recon showed the hibernation half is **already built for new
diff --git a/docs/MIGRATION.md b/docs/MIGRATION.md
index c2e10b9..f3782e9 100644
--- a/docs/MIGRATION.md
+++ b/docs/MIGRATION.md
@@ -301,6 +301,107 @@ lock).
 
 ---
 
+## Enabling hibernation on an existing machine (no reinstall)
+
+New Nomarchy installs are hibernation-ready out of the box — the installer
+defaults the swapfile to **= RAM** on its own `@swap` subvolume and wires the
+resume offset. This section is for machines that have **no hibernate swap**:
+one installed with `swap = 0`, one migrated here whose reused
+`hardware-configuration.nix` carries no swapfile, or an older install
+predating the default. If `swapon --show` already lists `/swap/swapfile`,
+you have nothing to do.
+
+Hibernation writes RAM to disk, and zram (compressed *RAM*) can't hold that
+image across a power-off — so you need a real disk swap ≥ the RAM you use.
+Nomarchy puts it on an `@swap` subvolume *inside* the encrypted volume, so
+the image is encrypted at rest and the initrd LUKS unlock gates resume.
+
+> **Reversible:** this is one subvolume plus four config lines. Remove them
+> and rebuild — or just boot the previous generation — to undo. `/home` is
+> never touched.
+
+Worked example below is **this machine**: LUKS mapper `cryptroot`, btrfs `@`.
+Substitute your own device/UUID/offset where shown.
+
+### 1. Size and locate
+
+```bash
+# Swap = RAM, rounded up to whole GiB (matches the installer default).
+ram_gb=$(awk '/MemTotal/ {print int(($2 + 1048575) / 1048576)}' /proc/meminfo)
+
+# The decrypted BTRFS device backing / (strip the [subvol] suffix) and its
+# filesystem UUID — the same UUID resolves to the mapper once initrd unlocks.
+dev=$(findmnt -no SOURCE / | sed 's/\[.*//')       # e.g. /dev/mapper/cryptroot
+fsuuid=$(findmnt -no UUID /)                        # e.g. d8e2b02d-…
+echo "swap=${ram_gb}G  dev=$dev  uuid=$fsuuid"
+```
+
+### 2. Create the `@swap` subvolume + swapfile
+
+```bash
+# Create the subvolume at the BTRFS top level (subvolid=5), beside @, @home…
+sudo mkdir -p /mnt/btrfs-top
+sudo mount -o subvolid=5 "$dev" /mnt/btrfs-top
+sudo btrfs subvolume create /mnt/btrfs-top/@swap
+sudo umount /mnt/btrfs-top && sudo rmdir /mnt/btrfs-top
+
+# Mount it and create the swapfile. `mkswapfile` applies the BTRFS NOCOW
+# requirements automatically (a copy-on-write swapfile would corrupt).
+sudo mkdir -p /swap
+sudo mount -o subvol=@swap,noatime "$dev" /swap
+sudo btrfs filesystem mkswapfile --size "${ram_gb}g" --uuid clear /swap/swapfile
+```
+
+### 3. Read the resume offset
+
+```bash
+sudo btrfs inspect-internal map-swapfile -r /swap/swapfile   # prints the offset
+```
+
+### 4. Wire it into `system.nix`
+
+Add these to your machine's `system.nix`, substituting your `$fsuuid` and the
+offset from step 3. The `fileSystems."/swap"` mount is **required** on this
+path — a fresh install inherits it from disko-generated
+`hardware-configuration.nix`, but a hand edit must declare it so `/swap` is
+mounted before swap activates:
+
+```nix
+  # Hibernation: encrypted swapfile on the @swap subvolume.
+  fileSystems."/swap" = {
+    device = "/dev/disk/by-uuid/<fsuuid>";
+    fsType = "btrfs";
+    options = [ "subvol=@swap" "noatime" ];
+  };
+  swapDevices = [{ device = "/swap/swapfile"; }];
+  boot.resumeDevice = "/dev/disk/by-uuid/<fsuuid>";
+  boot.kernelParams = [ "resume_offset=<offset>" ];
+```
+
+zram stays on by default (Nomarchy sets `zramSwap` at priority 100 in
+`modules/nixos/oom.nix`); this disk swapfile sits lower, so day-to-day
+paging stays in compressed RAM and the file is reserved for the hibernate
+image — exactly the intent.
+
+### 5. Rebuild and test
+
+```bash
+sudo nixos-rebuild switch --flake ~/.nomarchy#default
+systemctl hibernate      # or nomarchy-menu → Power → Hibernate
+```
+
+The machine powers off; on the next boot you unlock LUKS once and land back
+in your session. If you get a *fresh* boot instead, the usual cause is a
+wrong `resume_offset` or a swapfile smaller than in-use RAM — re-read the
+offset (step 3) and confirm `swap ≥ RAM`.
+
+**No LUKS?** Same steps; `dev`/`$fsuuid` point at the plain BTRFS partition
+and the image is unencrypted at rest. **`swap = 0` opt-out** stays valid — if
+you don't want hibernation, skip all of this; the Power-menu Hibernate row
+just reports that no swap is configured.
+
+---
+
 ## TuringMachine — the decisions, at a glance
 
 | Item | Choice |