fix(system): enable uwsm and fix session detection to allow VM login

- Enable programs.uwsm for session management.
- Improve SDDM theme session detection logic to be case-insensitive and more robust.
- Perform a global cleanup of 'Nnomarchy' and 'org.nnomarchy' typos across all scripts and configurations.

bin/hardware/nomarchy-battery-capacity

@@ -1,7 +1,7 @@
 #!/bin/bash
 
 # Returns the battery full capacity in Wh (rounded to whole number).
-# Used by nnomarchy-battery-status for displaying battery capacity.
+# Used by nomarchy-battery-status for displaying battery capacity.
 
 battery_info=$(upower -i $(upower -e | grep BAT))
 

bin/hardware/nomarchy-battery-monitor

@@ -3,13 +3,13 @@
 # Designed to be run by systemd timer every 30 seconds and alerts if battery is low
 
 BATTERY_THRESHOLD=10
-NOTIFICATION_FLAG="/run/user/$UID/nnomarchy_battery_notified"
-BATTERY_LEVEL=$(nnomarchy-battery-remaining)
+NOTIFICATION_FLAG="/run/user/$UID/nomarchy_battery_notified"
+BATTERY_LEVEL=$(nomarchy-battery-remaining)
 BATTERY_STATE=$(upower -i $(upower -e | grep 'BAT') | grep -E "state" | awk '{print $2}')
 
 send_notification() {
   notify-send -u critical "󱐋 Time to recharge!" "Battery is down to ${1}%" -i battery-caution -t 30000
-  nnomarchy-hook battery-low "$1"
+  nomarchy-hook battery-low "$1"
 }
 
 if [[ -n $BATTERY_LEVEL && $BATTERY_LEVEL =~ ^[0-9]+$ ]]; then

bin/hardware/nomarchy-battery-status

@@ -18,8 +18,8 @@ power_rate=$(echo "$battery_info" | awk '/energy-rate/ {
 }')
 
 state=$(echo "$battery_info" | awk '/state/ { print $2; exit }')
-time_remaining=$(nnomarchy-battery-remaining-time)
-capacity=$(nnomarchy-battery-capacity)
+time_remaining=$(nomarchy-battery-remaining-time)
+capacity=$(nomarchy-battery-capacity)
 
 if [[ $state == "charging" ]]; then
     echo "󰁹    Battery ${percentage}%  ·  ${time_remaining} to full  ·   ${power_rate}W / ${capacity}Wh"

bin/hardware/nomarchy-brightness-display

@@ -1,7 +1,7 @@
 #!/bin/bash
 
 # Adjust brightness on the most likely display device.
-# Usage: nnomarchy-brightness-display <step>
+# Usage: nomarchy-brightness-display <step>
 
 step="${1:-+5%}"
 
@@ -18,4 +18,4 @@ done
 brightnessctl -d "$device" set "$step" >/dev/null
 
 # Use SwayOSD to display the new brightness setting.
-nnomarchy-swayosd-brightness "$(brightnessctl -d "$device" -m | cut -d',' -f4 | tr -d '%')"
+nomarchy-swayosd-brightness "$(brightnessctl -d "$device" -m | cut -d',' -f4 | tr -d '%')"

bin/hardware/nomarchy-brightness-display-apple

@@ -8,5 +8,5 @@ else
   device="$(sudo asdcontrol --detect /dev/usb/hiddev* | grep ^/dev/usb/hiddev | cut -d: -f1)"
   sudo asdcontrol "$device" -- "$1" >/dev/null
   value="$(sudo asdcontrol "$device" | awk -F= '/BRIGHTNESS=/{print $2+0}')"
-  nnomarchy-swayosd-brightness "$(( value * 100 / 60000 ))"
+  nomarchy-swayosd-brightness "$(( value * 100 / 60000 ))"
 fi

bin/hardware/nomarchy-brightness-keyboard

@@ -1,7 +1,7 @@
 #!/bin/bash
 
 # Adjust keyboard backlight brightness using available steps.
-# Usage: nnomarchy-brightness-keyboard <up|down|cycle>
+# Usage: nomarchy-brightness-keyboard <up|down|cycle>
 
 direction="${1:-up}"
 
@@ -39,4 +39,4 @@ brightnessctl -d "$device" set "$new_brightness" >/dev/null
 
 # Use SwayOSD to display the new brightness setting.
 percent=$((new_brightness * 100 / max_brightness))
-nnomarchy-swayosd-kbd-brightness "$percent"
+nomarchy-swayosd-kbd-brightness "$percent"

bin/hardware/nomarchy-hw-framework16

@@ -3,4 +3,4 @@
 # Detect whether the computer is a Framework Laptop 16.
 
 [[ $(cat /sys/class/dmi/id/sys_vendor 2>/dev/null) == "Framework" ]] &&
-  nnomarchy-hw-match "Laptop 16"
+  nomarchy-hw-match "Laptop 16"

bin/hardware/nomarchy-hw-match

@@ -1,6 +1,6 @@
 #!/bin/bash
 
 # Match against the computer's DMI product name (case-insensitive).
-# Usage: nnomarchy-hw-match "XPS"
+# Usage: nomarchy-hw-match "XPS"
 
 grep -qi "$1" /sys/class/dmi/id/product_name 2>/dev/null

bin/hardware/nomarchy-hw-surface

@@ -3,4 +3,4 @@
 # Detect whether the computer is a Microsoft Surface device.
 
 [[ $(cat /sys/class/dmi/id/sys_vendor 2>/dev/null) == "Microsoft Corporation" ]] &&
-  nnomarchy-hw-match "Surface"
+  nomarchy-hw-match "Surface"

bin/hardware/nomarchy-powerprofiles-list

@@ -1,7 +1,7 @@
 #!/bin/bash
 
 # Returns a list of all the available power profiles on the system.
-# Used by the Nnomarchy Menu under Setup > Power Profile.
+# Used by the Nomarchy Menu under Setup > Power Profile.
 
 powerprofilesctl list |
   awk '/^\s*[* ]\s*[a-zA-Z0-9\-]+:$/ { gsub(/^[*[:space:]]+|:$/,""); print }' |

bin/hardware/nomarchy-restart-makima

@@ -1,5 +1,5 @@
 #!/bin/bash
 
-# Restart makima - key remapping service for remapping Copilot key to Nnomarchy Menu
+# Restart makima - key remapping service for remapping Copilot key to Nomarchy Menu
 
 sudo systemctl restart makima

bin/hardware/nomarchy-toggle-hybrid-gpu

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 # Toggle dedicated vs integrated GPU mode via supergfxd (for hybrid gpu laptops, like Asus G14).
-# Declarative enablement + Runtime mode switching for Nnomarchy NixOS.
+# Declarative enablement + Runtime mode switching for Nomarchy NixOS.
 
 STATE_FILE="/etc/nixos/state.json"
 
@@ -30,14 +30,14 @@ case "$gpu_mode" in
   if gum confirm "Switch to Hybrid mode (enables dGPU) and reboot?"; then
     supergfxctl -m Hybrid
     echo "Switching to Hybrid mode..."
-    nnomarchy-system-reboot
+    nomarchy-system-reboot
   fi
   ;;
 "Hybrid")
   if gum confirm "Switch to Integrated mode (disables dGPU) and reboot?"; then
     supergfxctl -m Integrated
     echo "Switching to Integrated mode..."
-    nnomarchy-system-reboot
+    nomarchy-system-reboot
   fi
   ;;
 *)

bin/hardware/nomarchy-wifi-powersave

@@ -1,14 +1,14 @@
 #!/usr/bin/env bash
 
 # Toggles wifi power saving declaratively.
-# Usage: nnomarchy-wifi-powersave <on|off>
+# Usage: nomarchy-wifi-powersave <on|off>
 
 STATE_FILE="/etc/nixos/state.json"
 
 case "$1" in
 on)  value="true" ;;
 off) value="false" ;;
-*) echo "Usage: nnomarchy-wifi-powersave <on|off>"; exit 1 ;;
+*) echo "Usage: nomarchy-wifi-powersave <on|off>"; exit 1 ;;
 esac
 
 sudo jq ".wifi.powersave = $value" "$STATE_FILE" > /tmp/state.json && sudo mv /tmp/state.json "$STATE_FILE"